기타 기계류

Shot Blasting Machine

    Parameter: 0.6-1.2/3-5/1.5-2.5 T/h

This series is used for surface cleaning, rust removing, and surface intensification of each kind of middle and small scale casting, forging and so on. It is suitable for different production scale, can be stand-alone use and many units can also be used in conjunction with the continuous conveyor components, composing the production of clean-up lines.

Q32 series abrade cleaning up machine has the advantages of advanced design, reasonable structure small energy consumption and high efficiency.

This machine normally used for blasting of casting, forging, spare parts. After the power supply is opened, start the dust collector and elevator ect, the preparation work completed. The workpieces put into the cleaning chamber and landed on the rubber crawler. Then, close the door of cheaning chamber, start the blasting wheel and shot gate, begin to shot blasting. At the same time, the crawler rolls around, causing the workpiece to roll continuously to ensure that it is cleaned evenly. Splashed steel shot will into screw conveyor through the holes of rubber crawler, and into the bottom of elevator, then lift it vertically to the top separator. Finally, the steel shot that has been separated and purified will into the shot blasting wheel through shot gate. Blasting time (according to the workpiece situation setting) controlled by time relay. After finished, the shot gate and blasting wheel will stop running. Then, open the cleaning chamber door, let the track rotated backward, so that the workpieces have been cleaned will be discharge.

Application:

Click here for price
Click
here
for
price

We will contact with you within 8 hours

* E-mail:Double check your email address, maybe you have spelling mistakes, thanks.
* Company Name:
 Country:
* Detail:
 Upload: browse