와이어: 0.01-10mm


    스트립: 0.05*5.0-5.0*250mm


    : OD 4-50mm;


    파이프: OD 6-273mm, thickness 1-30mm; Length 1000-8000mm

     


    Wire: 0.01-10mm


    Strip: 0.05*5.0-5.0*250mm


    Bar: OD 4-50mm;


    Pipe: OD 6-273mm, thickness 1-30mm; Length 1000-8000mm

하스텔로이 X 스틸 제품:


기타 통칭:

Nickel X, Alloy X, Nickelvac HX, Microfer 4722, Altemp HX, Inconel HX.

동등 명칭:UNS N06002; DIN W. Nr. 2.4665

규격:
와이어: 0.01-10mm    
스트립: 0.05*5.0-5.0*250mm
바: OD 4-50mm;
파이프: 바깥지름 6-273mm, 두깨 1-30mm; 길이 1000-8000mm
시트: 두깨 0.8-36mm; 너비 650-2000mm

표면처리: 블랙, 밝은 광택, 거친 마감, No 4 마감, 광채제거 마감, bA 마감, 기타 마감



Hastelloy X steel products:


Common Other Names: 
Nickel X, Alloy X, Nickelvac HX, Microfer 4722, Altemp HX, Inconel HX.
Equivalent designations: UNS N06002; DIN W. Nr. 2.4665
Specification:
Wire: 0.01-10mm
Strip: 0.05*5.0-5.0*250mm
Bar: OD 4-50mm;
Pipe: OD 6-273mm, thickness 1-30mm; Length 1000-8000mm
Sheet: Thickness 0.8-36mm; Width 650-2000mm

Surface Treatment: Black, Bright polished, Rough Turned, No 4 Finished, Matt Finished, bA Finished, or other Finished


Product list and standard:



자동차 퓨즈 화학 원소

Chemical element for automotive fuse:

 

 

물리적특성

Physical properties:

 

 

가공방식

processing method: 


Raw material→ Smelting→ Drawing→ Rolling→ Annealing→ Finished product→ Detection→ Packing→ Shipping

패킹: 

SMC의 제품은 규정 및 고객의 요청에 따라 포장되고 라벨이 부착됩니다. 보관 또는 운송 중에 발생할 수있는 손상을 피하기 위해주의를 기울입니다. 또한 제품 ID 및 품질 정보를 쉽게 식별 할 수 있도록 패키지 외부에 명확한 레이블이 표시됩니다.

1) SMC표준


2) 맞춤 설정

 

Packing: 


Shanghai Metal Products are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might be caused during storage or transportation.

In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.

1)Shanghai Metal Standard

2)Customization

응용: 

 

가스 터빈

석유화학 공업

공업 요르

열처리 장비

원자력공학

제트 엔진 연소실

항공기 객실 난방기

터빈 배출 부품

 

Applications: 

 

Gas turbines

Petrochemical industry

Industrial furnaces

Heat treating equipment

Nuclear engineering

Jet engine combustion chambers

Aircraft cabin heaters

Turbine exhaust components

 

하스텔로이 x 는 엔진 연소 장치, 과도 파이프 , 연소실 캔, 스프레이 바, 불가무리 , 배기관 선창 히터 등에가장 널리 사용되게 있는 고열 합금입니다. 이는 저항산화성이 강하고 중화 작용이 강하므로 공업난로 사용에 추천합니다.

하스텔로이 x 는 화학 공정 산업에서도 기상학적 작업 및 플래시 건조기 구성품을 위해 리토트, niffle, 촉매 서포트 그리드, 용해로 배플, 튜빙에 사용된다.

 

Hastelloy X is one of the most widely used nickel base superalloys for gas turbine engine combustion zone components such as transition ducts, combustor cans, spray bars and flame holders as well as in afterburners, tailpipes and cabin heaters. It is recommended for use in industrial furnace applications because it has unusual resistance to oxidizing, reducing and neutral atmospheres. 

Hastelloy X is also used in the chemical process industry for retorts, muffles, catalysts support grids, furnace baffles, tubing for pyrolysis operations and flash drier components.

 

 

장점

하스텔로이 x는 뛰어난 고온 강도, 산화 저항 및 패브릭성을 갖춘 니켈-크롬-철-알루미늄 슈퍼 레일입니다.합금 X의 산화 저항은 2200°F까지 탁월합니다.니켈 합금은 석유 화학 제품에 사용되는 응력 부식 균열에 대해 예외적으로 내성이 있는 것으로 밝혀졌다.몰리브데늄 함량에 의해 제공되는 매트릭스 보강은 우수한 제조 특성을 지닌 용해 합금에서 높은 강도를 가져옵니다.니켈 합금은 열과 산화에 대한 저항으로 주로 알려져 있지만, 염화물의 응력-부식 균열, 침탄, 공기 감소 또는 탄화에 대한 뛰어난 저항성을 가지고 있습니다.두가지 공통 조건이 있어 고온 합금, 침탄 및 니트라이드의 조기 고장으로 이어지는 경우가 많습니다.


하스텔로이 x는 훌륭한 성형 및 용접 특성을 가지고 있다. 그것은 위조될 수 있고, 그것의 좋은 연성 때문에, 냉간 가공될 수 있다. 이 용접기는 차폐 금속 아크, 가스 텅스텐 아크, 가스 금속 아크 및 침수 아크 프로세스를 포함해 수동 및 자동 방법으로 용접될 수 있다.합금은 저항 용접이 가능하다. 고온 성형의 경우 합금을 215°F(115°C)의 시작 온도로 가열해야 합니다.

Advantages:

Hastelloy X is a nickel-chromium-iron-molybdenum superalloy with outstanding high temperature strength, oxidation resistance, and fabricability. Alloy X’s oxidation resistance is excellent up to 2200°F. This nickel steel alloy has also been found to be exceptionally resistant to stress-corrosion cracking in petrochemical applications. Matrix stiffening provided by the molybdenum content results in high strength in a solid-solution alloy having good fabrication characteristics. Although this nickel alloy is primarily noted for heat and oxidation resistance it also has good resistance to chloride stress-corrosion cracking, carburization, and excellent resistance to reducing or carburizing atmospheres. Two common conditions that often lead to early failure in high temperature alloys, carburization and nitriding.

 

Hastelloy X has excellent forming and welding characteristics. It can be forged and, because of its good ductility, can be cold worked. It can be welded by both manual and automatic methods including shielded metal arc, gas tungsten arc, gas metal arc and submerged arc processes. The alloy can also be resistance welded. For hot forming, the alloy should be heated to a starting temperature of 2150°F (1175°C).

Click here for price
Click
here
for
price

We will contact with you within 8 hours

* E-mail:Double check your email address, maybe you have spelling mistakes, thanks.
* Company Name:
 Country:
* Detail:
 Upload: browse