아연도금 강판

도로 배수창

    종류: T, U, M

     

    표준: YB/T4001.1-2007

     

    표면 처리: 용융 아연 도금,등

     

     

    Type: T, U, M

     

    Standard: YB/T4001.1-2007

     

     

    Surface treatment: Hot-dip galvanized,etc

배수 피트 / 트렌치 커버의 규격:
1. 종류: T, U, M,표준 종류 3개, 특별한 요구에 따라 설치할 수도 있습니다.
2. 재료:탄소강/ 스테인레스 스틸
3. 표면 처리: 용융 아연 도금, 팬트나 다른 내부식 코팅
4. 표준: YB/T4001.1-2007, ANSI/NAAMM, BS4592, AS1657

5. 응용: 배수 시설, 공원 및 토목 공사 등

배수 피트 / 트렌치 커버의 특징:

- 용융 아연 도금으로 수명 연장
- 좁은로드 바에 의해 생성되는 최대 수로로 인한 높은 수력 효율 - 프레임 앵글과 변형 된 스틸 앵커 앵커에서 콘크리트에 프레임 고정 고정
- 낮은 프레임 및 격자 가중치로 인한 안전한 설치
- 저중량 및 회절 격자 힌지의 가용성으로 인한 안전한 개폐





Specifications of Drainage Pit/Trench Cover:
1. Type: T, U, M, three standard type, and we can accept customization accroding to your special requirement
2. Material: Carbon steel/ stainless steel
3. Surface treatment: Hot-dip galvanizing, paint or other anti-corrosive coatings
4. Standard: YB/T4001.1-2007, ANSI/NAAMM, BS4592, AS1657

 5. Application: draining well, park and civil projects, etc

Features of Drainage Pit/Trench Cover:

- Extended life from hot dip galvanizing

- High hydraulic efficiencies due to maximum waterway created by narrow load bars Secure anchoring of frame in concrete from out turned frame angles and deformed steel rod anchors

- Safe installation arising from low frame and grating weights

- Safe opening and closing due to low weights and the availability of grating hinging




종류 M

Type M 

M 형 트렌치 커버: 보통 충격 저항을 높이기 위해 50mm 크로스바 피치의 격자를 사용하십시오.

Type M Trench cover:usually use the grating with 50mm cross bar pitch to enhance the impact resistance.


종류 T

Type T 

타입 T 트렌치 커버 : 하이 웨이를 제외하고, T 트렌치 커버는 혼잡하지 않은 다른 모든 도로에 적합합니다. 위험을 피하기 위해 나사 고정이 권장됩니다. 이러한 종류의 트렌치 커버는 앵글 강철 프레임과 함께 T 형 도랑에 사용됩니다. JGxxx / 30 / 100은 일반적으로 T 트렌치 커버를 만드는 데 사용되며 다른 유형도 사용할 수 있습니다. 공공 장소에서 사용되는 트렌치 덮개의 경우 50mm 크로스 바 피치의 격자가 권장됩니다. 고객 요청에 따라 톱니 형 및 I 형 격자 제공합니다.

Type T Trench cover: except for high way, T trench cover is suitable for all other roads, which are not crowded. Screw fixing is recommended to avoid danger. This kind of trench cover is used on T shape ditch, with angle steel searing frame. JGxxx/30/100 is generally used for making T trench cover, and other types are also available. For the trench covers used in public places, the grating with 50 mm cross bar pitch is recommended. Serrated type and I bar type grating is available according to customer requests 


종류 U

Type U 

U 자형 트렌치 커버 : 가장자리가없는 대부분의 콘크리트 그루브와 관련하여 그루브 에지에 특별한 요구 사항이 없기 때문에 U 트렌치 커버를 사용하는 것이 매우 간단하고 경제적 일 것입니다. 앵글 강은 상단 가장자리에 채워야합니다. 부하가 T-6 및 T-14 인 경우. U 트렌치 조립 블록은 더러운 물이 지구로 새어 나가는 것을 방지하기 위해 사용할 수도 있습니다. 그러나 U 트렌치 커버는 자동차가 가로 질러야 할 때 사이드 도랑에 적합합니다.

Type U Trench cover: regarding most concrete groove without edge, it would be very simple and economical to use U trench cover for there is no special requirement to groove edge. It’s suggested that angle steel should be filled in upper edge. If the loads are T-6 and T-14. The U trench prefab blocks are also available to prevent dirty water to leak in to earth. But U trench cover is just suitable for side ditch when a car need to cross it

배수 피트 / 트렌치 커버의 표장:

SMC는 규정 및 고객의 요청에 따라 포장되고 라벨이 부착되고 보관 또는 운송 중에 발생할 수있는 손상을 피하기 위해주의를 기울일 뿐만아니라 제품 ID 및 품질 정보를 쉽게 식별 할 수 있도록 패키지 외부에 명확한 레이블이 표시됩니다.

 

Packaging for Drainage Pit/ Trench Cover:

 

Shanghai Metal Products are packed and labeled according to the regulations and customer’s requests. Great care is taken to avoid any damage which might be caused during storage or transportation. In addition, clear labels are tagged on the outside of the packages for easy identification of the product I.D. and quality information. 

배수 피트 / 트렌치 커버의 생산 공정:

재료-용접-자르기-엔드 플랫 용접-표면 처리-최종 선적

 

Manufacturing of Drainage Pit/ Trench Cover:

 

Material-welding-cutting-end plate welding-surface treatment-final shipment 

Click here for price
Click
here
for
price

We will contact with you within 8 hours

* E-mail:Double check your email address, maybe you have spelling mistakes, thanks.
* Company Name:
 Country:
* Detail:
 Upload: browse