금속 스탬핑을 위한 스테인레스 스틸 스트립의 규격:
1. 표준: ASTM A240, JIS G4304, G4305, GB/T 4237, GB/T 8165
2. 등급: 200시리즈&300시리즈&400시리즈
3. 두께: 0.05mm - 3.0mm
4. 너비: 3.2mm-550mm
5. 길이: 고객의 요구대로
6. 표면 처리: 2B, BA, Mirror finished, N04, Hair Line, Matt finished, 6K, 8K
7. 제조 기술 : 냉간 압연 / 냉연 / 열간 압연
Specifications of Stainless Steel Strip for Metal Stamping:
1. Standard: ASTM A240, JIS G4304, G4305, GB/T 4237, GB/T 8165
2. Grade: 200series&300series&400series
3. Thickness: 0.05mm - 3.0mm
4. Width: 3.2mm-550mm
5. Length: as customers' request
6. Surface finish: 2B, BA, Mirror finished, N04, Hair Line, Matt finished, 6K, 8K
7. Manufacture technology: cold drawn/cold rolled/hot rolled
FAQ
Q: 당신은 무역 회사입니까 아니면 제조업체입니까?
A:우리는 제조업체입니다. 우리는 슬리 팅 후에 광택 처리,둥근 모서리와 같은 더 많은 가공을 할 수 있습니다.
Q: 무료 샘플을 제공 할 수 있습니까?
A: 예, 재고가있는 경우 할 수 있습니다.
Q: 원자재는 어디에서 구입하나요?
A: BAOSTEEL, TISCO, POSCO, JISCO 등.
Q: 슬리팅 너비범위는 무엇입니까?
A: 스테인레스 스틸 스트립의 두께에 따라 다릅니다. 정기적으로 최대 슬릿 팅 폭은 650mm이며 최소. 5mm 혹은 이하입니다.
Q: 표준 패키지는 무엇입니까?
A:우리의 표준패키지는 방수종이 이며 혹시나 작은 코일일경우 우리는 팔레트 또는 나무 패키기로 포장합니다.
FAQ
Q: Are you a trade company or manufacturer?
A: We’re a manufacturer. We can do more processings like polished, round edge etc. after slitting.
Q: Can you provide free sample?
A: Yes, we can if there’re some in stock.
Q: Where is your raw material from?
A: BAOSTEEL, TISCO, POSCO, JISCO etc.
Q: What’s your range of slitting width?
A: It depends on thickness of stainless steel strip. Regularly the max. slitting width is 650mm and the min. is 5mm or less.
Q: What’s your standard package?
A: Our standard package is waterproof paper with wraps, packed on a pallet or in a wooden package if it’s small coil.
We will contact with you within 8 hours