아연도금& 갈바륨 스틸(PPGI, PPGL)

나무 무늬 프리팬티드 아연 도금 스틸 코일

    표준: JIS3321/ASTM A792M

     

    두께: 0.15mm-1.2mm, 다 할 수 있습니다.

     

    너비: 600mm-1250mm, 다 할 수 있습니다.

     

     

     

    Standard: JIS3321/ASTM A792M

     

    Thickness: 0.15mm-1.2mm, all available

     

     

    Width: 600mm-1250mm, all available

Product Detail

나무 무늬 프리팬티드 아연 도금 스틸 코일의 규격:
1) 생산 능력: 알루 스틸 강철에 대해 월 10,000 톤
2) 표준: JIS3321/ASTM A792M
3) 두께: 0.15mm-1.2mm, 다 할 수 있습니다.
4) 너비: 600mm-1250mm, 다 할 수 있습니다.
5) 길이: 고객의 요구에 따라
6) 코일 내경: 508/610mm
7) 경도:소프트
8) 코팅: AZ30- AZ180
9) 컬러 시리즈: RAL 컬러
10) 최소 주문량: 각 두께 25 톤, 1 회 배달시 1x20 '
11)응용: 다양한 응용의 이상한 재료 이고 특히 강한 대기 저항이 필요할 때 사전 설계된 건물, 건축 패널,

루핑,사이딩,클래딩 및 많이 다른 건물 구성같은 것의 이상한 재료입니다. 



Specification of Prepainted Galvalume Steel Coil (AZ150+PVDF, Anti-finger):
1) Capacity: about 10,000 ton per month for aluzinc steel
2) Standard: JIS3321/ASTM A792M
3) Thickness: 0.15mm-1.2mm, all available
4) Width: 600mm-1250mm, all available
5) Length: according to the customer's request
6) Coil ID: 508/610mm
7) Hardness:Soft
8) Coating: AZ30- AZ180
9) Color series: RAL color
10) Min trial order: 25 ton each thickness, 1x20' per delivery 
11) Application: it is ideal for a wide range of applications, especially when superior atmospheric resistance is required, such as pre-engineered buildings, architectural panels, roofing, siding, cladding, and many other building components.

 

나무 무늬 프리팬티드 아연 도금 스틸 코일의 구조

Structure Of Prepainted Galvalume Steel Coil (AZ150+PVDF, Anti-finger): 


나무 무늬 프리팬티드 아연 도금 스틸 코일의 생산 시설

지불 부분:

작동 원리 및 기능은 아연 도금 공정과 비슷한데 결합자를 사용하여 강판을 함께 고정시키는 것이 다릅니다.

깨끗하고 사전 처리 및 화학 코팅

GI 코일은 탈지제 탱크에서 씻깁니다. 탈지제 탱크에서는 오일과 먼지가 화학 수단으로 이동할 수 있습니다. 표면에 형성된 흰색 녹이 브러시 어셈블리에서 제거 될 수 있습니다. 깨끗한 코일은 컨디셔너와 크로메이트 탱크에서 컨디셔너와 크로메이트로 코팅되어 더 나은 접착력과 내식성을 제공합니다.

프라임 앤드 피니시 코팅

내식성과 페인트 접착력을 강화하기 위해 프라이머라고 불리는 페인트의 기본 층이 화학 코터에 도포됩니다. 요청 된 색상과 사양은 도장 작업을 완료하기 위해 프라이머 코팅 코일의 상단과 하단 모두에 적용됩니다.

프라미와 완성 오븐

프라이머 코팅은 프라이머 오븐에서 더 경화되고 프라이머 물 퀸치에서 냉각되어 페인트 된 코일이 완전히 경화되도록합니다. 마찬가지로 마감 오븐과 마감 수처리는 적용된 페인트가 완전히 경화되고 냉각되도록하는 역할을합니다.


Production Facility of Prepainted Galvalume Steel Coil (AZ150+PVDF, Anti-finger):
Pay-off Section
The operating principles and functions are similar to the galvanizing process, except that it uses a joiner to fasten the steel sheets together.
Clean, Pre-treatment and Chemical Coating


The GI coil is cleaned at the degreaser tank, where oil and dust are removed by chemical means. The white rust formed on the surface can be removed at the brush assembly. The clean coil will then be coated with conditioner and chromate at the conditioner and chromate tank respectively, to provide better adhesion and corrosion resistance ability.
Prime and Finish Coating
A basic layer of paint, called primer, is applied on the chemical coater in order to strengthen the corrosion resistance and paint adhesion ability. The requested colours and specifications of paint will be applied at both the top and bottom of the primer coated coil to complete the painting work.
Prime and Finish Oven
The primer coating is further cured at the primer oven and cooled at the primer water quench to ensure the painted coil is completely cured. Similarly, the finish oven and finish water quench also serve to ensure that the paint applied is completely cured and cooled. 


나무 무늬 프리팬티드 아연 도금 스틸 코일의 포장

SMC는 규정 및 고객의 요청에 따라 포장되고 라벨이 부착되고 보관 또는 운송 중에 발생할 수있는 손상을 피하기 위해주의를 기울일 뿐만아니라 제품 ID 및 품질 정보를 쉽게 식별 할 수 있도록 패키지 외부에 명확한 레이블이 표시됩니다. 

 

 

Packaging Information for Prepainted Galvalume Steel Coil (AZ150+PVDF, Anti-finger):

 

Shanghai Metal Products are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might be caused during storage or transportation. In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.

나무 무늬 프리팬티드 아연 도금 스틸 코일의 생산 라인:

전형적인 수평 컬러 코티 아연 도금 스틸 코일 라인은 아래 단계들로 구성됩니다:

공정 흐름도:

릴 풀림 → 이중 절단 전단 → 용접기 노처 → 입구 누설기 → 예비 세척 구역 → 용광로 → 고온 굴레 →

아연 포트 → 에어 나이프 → 냉각기 → 수냉 → 건조기 → 스킨 패스 밀 → 건조기 → 장력 조절기 → 건조기 →

화학 코터 → 화학 오븐 → 냉각기 → 출구 축 압기 → 오일러 → 배출 전단 → 장력 릴.

SMC는 착색 아연 도금 스틸 코일의 국제 생산업자와 공급업자입니다. 우리가 아연 도금 스틸 코일의 기초위에 착색 라인 두 개 있습니다. 우리가 매 라인에

월 수출은 거의 5,000톤입니다.

 

 

 

 

Production Line of Prepainted Galvalume Steel Coil (AZ150+PVDF, Anti-finger):

A typical Horizontal Color Coated Galvanized Steel Coil Line would comprise with the following steps:

 

Process Flow Diagram:

Pay off reel → double cut shear → welder-notcher → entry accumulator → pre cleaning section → furnace → hot bridle → zinc pot → air knife → after cooler → water quench → dryer → skin pass mill → dryer → tension leveler → dryer → chemical coater → chemical oven → cooler → exit accumulator → oiler → exit shear → tension reel.

 

Shanghai Metal Corporation is an international manufacturer and supplier for Prepainted Galvanized Steel Coil. We have two prepainted lines based on galvanized steel coil. Our monthly output for each line is approxiamtely 5,000 ton.

Click here for price
Click
here
for
price

We will contact with you within 8 hours

* E-mail:Double check your email address, maybe you have spelling mistakes, thanks.
* Company Name:
 Country:
* Detail:
 Upload: browse