비드 블래스트 스테인리스 시틸 시트의 규격:

1. 두께:0.3~3.0mm
2. 일반 너비:
    a. 1,000mm
    b.1,219 mm
    c. 커스터마이징되었지만 1,219 mm이하
3. 윤리 경영 길이 기준:100~5,000mm
4. 모든 것 표면 마무리:비드 블라스팅
5. 모든 것 제품 재료:201,202,304,316L, 430등
6. 나는 일반적인 사양:1000mmx2000mm, 1219 mmx4338 mm, 1219 mmx3048 mm. 또는 사용자 정의할 수 있습니다. 
7. 모든 것 색상:골든/샴페인/ 검은 색/청동/ 붉은 구리/장미 금/보라 색/ 빨간 색/자주 색/커피 골드/쥬얼리 블루/ 진한 갈색/무지개 등

Specifications of Bead Blast Stainless Steel Sheet:

1. Thickness scale: 0.3 - 3.0 mm
2. Normal Width:
    a. 1,000mm
    b. 1,219mm
    c. Customized, but not more than 1,219mm
3. Length scale: 100 - 5,000mm
4. Surface finish: Bead Blast
5. Product materials: 201, 202, 304, 316L,430, etc.
6. Common specification: 1000mmx2000mm, 1219mmx2438mm, 1219mmx3048mm. or can be customized . 
7. Colour: Golden/ Champagne / black / Bronze / Red copper / Rose gold / Rose red / Violet gold / Purplish red / Coffee gold / Jewelry blue / Dark brown / Rainbow etc. 
 

스테인리스 강 시트/강판의 제조 과정:



원료는 고온 압연 설비에 다양한 크기로 압연된다.

→열무 조개류 소재가 냉연 풀림 용해로에서 풀리고 산에 피클링 된다.

→모든 분쇄기 롤은 1차 교대 작업 후 적절한 챔퍼(chamfering)가 있는 정밀 연마기 상에 연마되어 있다.

→모든 시트는 다른 탱크에 절이고, 발송 전 브러시 롤 머신에서 건조시킨다.

→이 시트는 다시 풀리며, 면 고르기를 위해 기계를 펴기 위해 전송됩니다.

→다양한 단계에서 점검을 수행한다. 당사의 숙련된 직원이 롤링, 어닐링 및 피켓을 통해 전체 내부 프로세스를 적절히 통제하도록 한다.

Manufacturing Process of Stainless Steel Sheet/Plate:

Raw materials are sending to hot rolling units for rolling into different sizes.

→Hot rolled material is annealing in cold rolled annealing furnace and pickling in acid.

→All mill rolls are grinded on precision grinding machine with proper chamfering after first shift operation.

→All sheets are pickled in different tanks and dried on brush roll machine before dispatched.

→These sheets are again annealing and are sent to straighten machine for straightening.

→Inspections are done at various stages. Keep proper control overall internal process via rolling, annealing and pickling by our experienced staff. 

생산 과정

냉간 압연

Producing process

Cold rolled

열간 압연

Hot rolled

APPLICATION

Stainless steels of various kinds are used in thousands of applications. The following gives a flavour of the full range:

1.Domestic             

– cutlery, sinks, saucepans, washing machine drums, microwave oven liners, razor blades

2.Transport           

– exhaust systems, car trim/grilles, road tankers, ship containers, ships chemical tankers, refuse vehicles

3.Oil and Gas       

– platform accommodation, cable trays, subsea pipelines.

4.Medical               

– Surgical instruments, surgical implants, MRI scanners.

5.Food and Drink 

– Catering equipment, brewing, distilling, food processing.

6.Water                 

– Water and sewage treatment, water tubing, hot water tanks.

7.General             

– springs, fasteners (bolts, nuts and washers), wire.

8.Chemical/Pharmaceutical         

– pressure vessels, process piping.

9.Architectural/Civil Engineering

– cladding, handrails, door and window fittings, street furniture, structural sections,reinforcement bar, lighting columns, lintels, masonry supports

비드 블라스트 스테인리스 시틸 시트의 패킹 정보:


상하이 금속 제품은 규제와 고객의 요구에 따라 포장되고 라벨이 붙어 있다. 보관 또는 운반 도중에 발생할 수 있는 손상을 방지하기 위해 매우 주의해야 합니다. 일반적으로 비드 블라스트 스테인레스 스틸 시트에는 PVC코팅 메인 측으로 채워져 있고 나무 상자 안에 들어 있어야 한다.

Packing Information of Bead Blast Stainless Steel Sheet/Plate:

Shanghai Metal Products are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might otherwise be caused during storage or transportation.Usually, bead blast stainless steel sheets are packed with PVC coat main side and packed in wooden crate.

Applications of Bead Blast Stainless Steel Sheet:

Typical applications for mirror finish stainless steel includes 

1. Handrail

2. Elevator cabin

3. Construction field

4. Kitchen equipment

5. Ships building industry

6. Machinery and hardware fields 

7. Military and electricity industries

8. Petroleum and chemical industries

9. Food processing and medical industries, etc

FAQ

Q1:How many countries you already exported?

A1:Exported to more than 50 countries like Canada, United States, Kuwait, Egypt, Turkey, Jordan, Singapore etc.

Q2:How can I get some samples?

A2:Small samples in store and can provide the samples for free. Catalogue is available. Customized samples will take about 3-5days.

Q3:What is the MOQ?

A3:Stainless steel sheets 1 tons for stock material.

Q4:What is the delivery ?

A4:Sample order’s delivery time is 3- 5days. Regular orders are about 15-20 days.

Q5:How does your company do regarding quality control?

A5:Third party inspection like BV and SGS reports, production process followed the ISO 9001 system.